Your basket is currently empty!
Canare AKU-20SFYG 12G-SDI Active BNC SMT Card Edge Connectors
12G-SDI Active BNC integrating I/O interface device inside. It frees you from struggling with PCB design coping with return loss and board space.
Description
Key Features and Benefits
- Assembled on a PC board with SMT Card Edge Connector.
The pluggable 2-piece structure improves productivity and replaceability.
*Card Edge Connector sold separately - Supports 12G/6G/3G/HD/SD-SDI
- Reduce entire development cost as wel as development period.
- 16 mm: Minimum pitch between adjacent connectors
- Straight models can be mounted on the same board at the same height as 3G-SDI Active BNC.
- PIN control: status monitoring and mode change
- Command control for optimization and characterization
- Cable driver and equalizer with reclocker
- TX/RX/BiDi identification by insulation color
- Note: Card Edge Connector NOT included
BCAK12G-SDI
Type | Model | Form | Type | Built-in | Sales unit |
---|---|---|---|---|---|
BCAK-TL | Right Angle | Cable Driver | 5 pcs | ||
BCAK-RL | Cable Equalizer | ||||
BCAK-BL | Cable Driver & Equalizer | ||||
BCAK-TS | Straight | Cable Driver | |||
BCAK-RS | Cable Equalizer | ||||
BCAK-BS | Cable Driver & Equalizer |
SMT Card Edge Connectors12G-SDI
Type | Model | Form | Suit for | Sales unit |
---|---|---|---|---|
AKU-20LFYG | Right Angle | BCAK-TL BCAK-RL BCAK-BL |
5 pcs or (500 pcs / reel) | |
AKU-20SFYG | Straight | BCAK-TS BCAK-RS BCAK-BS |
Key Features and Benefits / SMT Card Edge Connectors
- Card Edge Connector for BCAK
- Same footprint for TX, RX and BiDi
- Applicable for reflow soldering
Specifications
Type | TX | RX | BiDi TX mode | BiDi RX mode |
---|---|---|---|---|
Supply Voltage | DC 2.5 V | |||
Current Consumption | 195 mA | 125 mA | 128 mA | 115 mA |
Operating Temperature | -40 °C to +85 °C | |||
Output Amplitude | 800 mV | N/A | 800 mV | N/A |
Equalization | N/A | 12G-SDI 100m over L-5.5CUHD |
N/A | 12G-SDI 100m over L-5.5CUHD |
Standards | SMPTE ST 2082-1, 2081-1, 424, 292, 259 BTA S-004C, EN 50083-9 |
|||
Weight | Right Angle: 9 g, Straight: 10 g |
< Panel Hole Dim. >
Right Angle | Straight | |
---|---|---|
Panel Hole Dim. | t1.6 Screw: M2.6 |
t1.6 Screw: M2.6 |
PCB Hole Dim. | use a M2.6 screw to fix BCAK to PCB. |
use a M2.6 screw to fix BCAK to PCB. |
- The dark shaded areas come into contact with the connector body.
Additional information
Standard package, pcs. | 20pcs., 100pcs., 10pcs., 1pc., 5pcs. |
---|
Reviews
There are no reviews yet.